FiTech EFI Tuning Forum

Forum breadcrumbs - You are here:ForumPost History: WillLennon
Please or Register to create posts and topics.

Post History: WillLennon

Thanks for the advice.  I adjusted it today.  My fast accel at the 170F was around a -10.  Not sure …In: Log review request
6 years ago
Thanks for the input. Not an electric fan. when I get towards higher rpms I do see spikes in rpm bu …In: Log review request
6 years ago
Anyone willing to look at a few data logs? I have a 30 sec idle log and a mildly aggressive 0-60 mph …In: Log review request
6 years ago
Thanks Austin.In: Logfile
7 years ago
So far my FiTech has been working pretty good. Starts every time and runs well, hot or cold. My ride …In: Logfile
7 years ago
Thanks Maxx.In: Another logfile opinion request.
7 years ago
Bump  In: Another logfile opinion request.
7 years ago
Still chasing a shake/vibration in my engine. I am pretty sure I have ruled out the FiTech, but does …In: Another logfile opinion request.
7 years ago
Thanks Austin.  Yes, I was driving when I took the logfile.   I reset all the learning and adjustmen …In: Logfile Opinion requested
7 years ago
I am still chasing a vibration/shudder in my engine.  Ford 302 (reman'd 87 block, stock), Go St …In: Logfile Opinion requested
7 years ago
Plugs are new.  I pulled three of them and all looked good.  I'll check the rest of them later …In: Opinion on log file
7 years ago
So that log looked good?  It's running rough.  Could there be a vacuum leak?  Do my vacuum numb …In: Opinion on log file
7 years ago
Had it running well, now not so much.  It running really rough.  I have quite a shake in the engine. …In: Opinion on log file
7 years ago
Austin.  Thanks.  I will switch out the CTS this week.  Also thinking about going with a higher temp …In: Log File Opinion
7 years ago
Couple more log files. Idle - after a long drive https://www.dropbox.com/s/hk9zuns7ex7rjvd/Idl …In: Log File Opinion
7 years ago
1970 Ford Bronco.  302, 3 speed.  Go Street 400hp, FCC2.  First logfile.  Seems to be running well.  …In: Log File Opinion
7 years ago
I have the same setup and was told to switch the regulators as well.  Mine is working well.In: Fuel Command Center 2 Regulator with 400 HP TB
7 years ago
I have  "70 Bronco, 302, engine was cleaned up, but not rebuilt during resto.  New Centech wiri …In: Fuel Systems that worked
7 years ago