Go street 400 tuning tips?
thanx bro i will keep you updated
she's running alot better but i still can't get my iac's down to 3 to 10 won't go passed30 and havin problems with the fuel pump makin a funny noise when i slow down to a complete stop any info would be helpful thanx
Send a data log.
Do you have a fuel pressure gauge? How is your pump hooked up, direct from Fitech orange wire? What pump are you running? Or are you running the FCC?
no fuel pressure gauge the pump is grounded to the cab the pump is the inline255L/H
how do you send a datalog
FCC?
FCC: Fuel Command Center
I'm not saying your pump isn't working correctly. It may be working to good. It may be over running the regulator. As far as the datalog. You must download the log from your handheld to your computer. Then you can attach the file to a post here on the site. I can then open it in spreadsheet form and look for issues. Or anyone else that wants to have a look.
ok not running the fuel command center
can you tell me how to do all that still learning
No problem. Start your engine. Let it warm up. Press the toggle button on your handheld. The screen will say datalog on. Let it idle for 20 seconds, then throttle it to get lean tip in. When done, press the toggle again. Datalog off.
Take your handheld to your computer and hook to USB. USB to Micro USB cable. Or Android phone cable. Press YES on the handheld when message comes up. Look on your computer for another drive. Open that drive, this is your Fitech files. Look for datalog file. Copy your datalog to your hard drive. Now you can attach the file to a post.