Fitech Forum

Search for:

Skip to content

Home
About
Contact
Privacy
Donate

FiTech EFI Tuning Forum

Forum Navigation

Forum Members Activity Login Register

Forum breadcrumbs - You are here:ForumPost History: phil302

Please Login or Register to create posts and topics.

Post History: phil302

phil302

User

Profile Post History

Yesterday before I cleared it. The fuel trim was hovering around -20 towards zero at idle. Should it …In: Saving and reloading tunes

7 years ago

Thanks, I will try this tomorrow. Hopefully it starts and drives as before. Since I managed to retur …In: Saving and reloading tunes

7 years ago

what is the correct procedure for saving and reloading tunes. I have spent quite a long time getting …In: Saving and reloading tunes

7 years ago

vacuum at idle is 14 inches and the cam setting on the handheld is set to 2In: engine fires then stalls

7 years ago

i have just finished fitting a relay to the white wire feed to be sure of a clean voltage and have b …In: engine fires then stalls

7 years ago

I fitted a wire to earth the throttle body, replaced spark plugs and have fitted a temporary splice …In: engine fires then stalls

7 years ago

does disconnecting the battery for a long period or using a battery isolator switch affect the fitec …In: disconnecting battery

7 years ago

should the iac steps remain where it is set? i set the iac to 6 with the car warm and after a few re …In: iac steps

7 years ago

i am having trouble with an engine start issue hot or cold, the engine fires then stalls straight aw …In: engine fires then stalls

7 years ago

Copyright © 2026 Fitech Forum. All Rights Reserved.

Home
About
Contact
Donate
Privacy

We need your help! Please notify immediately – admin@fitechforum.com – if you see any post in a foreign language or is off topic! This forum is for FiTech users and is English only!